Floating Holder
(Female Morse Taper Sleeve is spring loaded)

Shank Dia. 1" x 50 mm long
Bore: MT-2 (Other MT on request)
Body: 50 mm Dia x 53 mm long
Float: 0.5 mm
(Other O/D & MT on request)
 Floating Holder


Self Realeasing Tap Holder (RH Only)

More Rigid due to design of Tap Collet
Shank Dia.: 1" x 45 mm long
Body: 54 mm Dia. x 70 mm long
Max. Tapping Cap.: M20 or 3/4"w/w
 Self Realeasing Tap Holder (RH Only)


Self Releasing Die & Tap Holder (RH Only)

Shank Dia.: 1" x 45 mm long
Body: 54 mm Dia. x 70 mm long
Max. Threading length: 30 mm
To suit Round Die: 1.1/2" O/D
Max. Threading Cap.: M20 or 3/4"w/w
Max. Tapping Cap.: M20 or 3/4"w/w
 Self Releasing Die & Tap Holder (RH Only)


Tap Chuck (with JT Bore)
To be used with rubber collet)

Max. Cap.: M12 or 1/2"w/w
Mounting: JT-6
Max Dia.: 30 mm
Total Length: 75 mm
Std. Accessories
Spanner: 2 Nos.
Allen Key: 1 No.
Note: Can be used on machine with JT-6 Mounting or with suitable arbor
 Tap Chuck (with JT Bore)


Baby Chuck
(To be used with rubber collet to hold straight shank drills, etc. from 2.5 to 10 mm)

Baby Chuck (with straight shank)

 Baby Chuck (with MT-2) Baby Chuck (with JT-6)

Shank Dia.: 1" x 50 mm long
Overall Length 78 mm		 Shank MT-2
Overall Length 108 mm		 JT-6 Mount
Overall Length 65 mm


Max Dia. 30 mm * Supplied with one Spanner


Rubber Collet

To hold Shank Dia
Range of each Collet 2 to 4.5 mm,
3.5 to 6.5 mm, 6.5 to 10 mm
(Other range also available)
 Tap Chuck (with JT Bore)

Also available Turret socket, Adjustable Knurling tool holder, Revolving stop, Drill
chuck Arbor, Conversion sleeve, mini borer, Carbide lined collets & Guide Bushes.

about us || contact us || home